CircuitPython 11 Alpha Adds Video, Async SPI and Faster Display Rendering
- Dan Halbert
- 654 reads
CircuitPython 11 alpha adds video and audio tools, hardware backed cryptography, broader board support and notable display speedups, with migration changes to check.


CircuitPython 11.0.0-alpha.3 expands what the firmware can do with video, audio and hardware interfaces, while also delivering practical performance work across displays and image decoding. It’s an early build, so the features and fixes described here may change before CircuitPython 11.0.0 is final. For developers evaluating the upgrade, the headline additions are video pipeline modules on ESP32-P4, awaitable SPI transfers, new audio tools and hardware backed signing support. The upgrade also changes a few APIs and board identifiers that existing projects may depend on.
Video and audio move forward
The most visible new direction is initial video pipeline support, beginning on ESP32-P4. The mipicsi and videocore modules provide the initial pieces, while videogif.GifDecoder can send animated GIF frames into a videocore.VideoBuffer. This is an early foundation rather than a complete video stack, and the ESP32-P4 port itself remains alpha. Still, the combination gives projects a path to bring camera or animated image data into a display workflow using CircuitPython.
Audio work spans several areas. The new audiotap module lets code tap into a stream of audio objects, and audiopwmio is now available on ESP32-S2 and ESP32-S3. On ESP32-P4, support for usb_host_audio and audiotap broadens the options for audio input and processing. There are also fixes to echo pitch, mixer playback, and audio sample handling on SAMx5x boards.
MIDI playback in synthio.MidiTrack gets a more complete treatment. CircuitPython now follows the MIDI tempo track, handles long delays more accurately, supports running status, treats a Note On message with zero velocity as Note Off, and handles end-of-track markers correctly. Those changes address details that can make a MIDI file play incorrectly even when it loads successfully.
More direct hardware access and cryptography
Raspberry Pi Pico boards gain board.I2C(), board.SPI() and board.UART(), giving programs a board level way to access these common buses. The new async_spi module adds awaitable SPI transfers, which can help asynchronous code coordinate bus activity without blocking in the usual way. On RP2040 and RP2350 boards, picogame can also use asynchronous bus writes.
Two new modules bring hardware backed key operations and cryptographic primitives to Espressif devices. hardwarekey supports HMAC and RSA signing through on chip key stores, while cryptography adds P-256 ECDSA signature verification. These capabilities are initially supported on Espressif. Their practical value depends on the particular chip and project: code must account for where a feature is available, and portability across board families may be limited.
Other platform work includes an _airlift module to simplify communication with an AirLift co-processor, plus changes that let alternative firmware use UART to communicate with an ESP32-C6 co-processor. ESP32-P4 also gets updates to USB defaults, host audio, camera and display cleanup, and its firmware partition layout.
Performance and reliability work
Display and image handling account for some of the most concrete speed improvements. Rotated displays redraw about five times faster, and rotozoom can run up to 70 times faster on RP2xxx and Espressif platforms. JPEG decoding uses on chip support on ESP32-P4 and ESP32-S31, with a reported 10 to 20 times improvement there; ESP32-S3 boards with PSRAM get a separate four times decoding improvement. Audio mixing is faster on ESP32-S3 as well.
On RP2350, SHA-256 processing through hashlib is about 20 times faster. These figures apply to the named operations and hardware, not to whole program performance. The actual benefit will depend on the workload, board configuration and memory available. For display heavy projects or image based interfaces, however, the rendering and decoding work could make an immediate difference.
The fixes also cover everyday reliability: socket errors are now reported more appropriately after closure or reset; HTTPS servers accept normal clients; USB storage remains writable after a bus reset; and SSL sockets avoid crashes. E-paper refresh hangs, display freezes from keypad cleanup, SPI hangs, and several constructor and deinitialization bugs have been addressed across ports. SD card reads now report errors rather than returning bad data, and sdcardio cleanup is fixed.
Several behavior changes make errors clearer or align modules more closely with expectations. math now raises errors for out of domain arguments, as in CPython. Starting watchdog without a timeout raises an error, and os.urandom() reports an appropriate failure. The msgpack integer encoder uses the smallest suitable representation.
Board support and development infrastructure
The Zephyr port adds the MIMXRT1010-EVK, Adafruit Metro M7 1011, Adafruit Metro M7 1011 AirLift, Adafruit Circuit Playground Bluefruit and Adafruit MacroPad RP2040. It enables modules including keypad, keypad_demux, touchio, atexit, codeop and locale, and increases available RAM on Pico W and Pico 2 W. Improvements to native_sim cover interactive use, stack sizing and overflow handling, and allow the MicroPython and CircuitPython test suite to run there.
New board builds include Elecrow CrowPanel 2.13 EPaper, Espressif ESP32-S3-DevKitC-1-N32R8 v1.1, M5Stack AtomS3R, MoonYard Equinox, ThePiHut Baguette S3 and several Unexpected Maker boards: TinyC6[D], TinyPICO[D], TinyS3[D], ProS3[D] and FeatherS3[D]. Individual fixes also improve the M5Stack Cardputer keyboard, grayscale on Pimoroni Badger2350, battery startup on Pimoroni Inky Frames and I/O expander behavior on Yoto.
Build and documentation work rounds out the changes. Firmware flash and RAM reporting is more accurate, Ubuntu package downloads are cached for build jobs, and the Windows mpy-cross build uses a smaller toolchain download. Documentation clarifies board support across Zephyr and classic builds, terminal color behavior, bitmap storage, BLE bonding behavior, socket pools and the audio echo effect.
Upgrade considerations and port maturity
CircuitPython 10.x library bundles remain compatible with 11.0.0 builds, which should ease library migration. There are still application changes to review. The broadcom, litex and renode ports have been removed. SDIO pin names changed on Adafruit Feather Adalogger RP2040 and RP2350 boards. On Espressif, processor UID values now use canonical order, changing the reported processor ID, the value in boot_out.txt and the USB serial number. OnDiskBitmap now accepts a filename instead of an open file, and the en_x_pirate translation has been discontinued.
Port maturity varies. The stable group includes atmel-samd, cxd56, Espressif, Nordic, Raspberry Pi and STM32F4. Alpha ports include Analog Devices MAX32690, ESP32-P4 and ESP32-S31, NXP i.MX RT10xx, Silicon Labs MG24, non-STM32F4 STM families and Zephyr. New video work and several board additions are therefore best evaluated against the status of the specific target, rather than treated as equally mature across the project.
Firmware downloads and language choices are available through the CircuitPython downloads page. Installation instructions are in the CircuitPython setup guide, with library guidance on its library page. Developers can use code.circuitpython.org or the Mu editor to edit programs and access the serial REPL. Reference documentation is hosted on Read the Docs, and known issues are tracked in the project’s issue tracker.
For teams deciding whether to try this alpha, the clearest reasons are support for a newly targeted board or a direct need for the video, async bus, audio or cryptographic features. Existing projects should first check the API and identifier changes, then validate behavior on their specific port. The final 11.0.0 build may add further changes and fixes.